System connectors and interfaces
Profile connectors and interfaces – baseplates, angle brackets, beam clamps, saddles and system nuts and bolts for connecting profiles and media in modular supports
232 Products
Filter
- Description
- Flat T channel connector for fastening two MT channels together
- Material composition
- Q235 or better steel
- Surface finish
- Indoor Coated - Electro galvanised
- Environmental conditions
- Dry indoor conditions (C1) Indoor with temporary condensation (C2)
- Description
- Flat cross channel connector for fastening three MT channels together
- Material composition
- Q235 or better steel
- Surface finish
- Indoor Coated - Electro galvanised
- Environmental conditions
- Dry indoor conditions (C1) Indoor with temporary condensation (C2)
- Description
- Flat T channel connector for fastening two MT strut channels together
- Material composition
- Q235 or better steel
- Surface finish
- Indoor Coated - Electro galvanised
- Environmental conditions
- Dry indoor conditions (C1) Indoor with temporary condensation (C2)
- Description
- Flat channel connector used as a longitudinal extender for MT channels
- Material composition
- Q235 or better steel
- Surface finish
- Indoor Coated - Electro galvanised
- Environmental conditions
- Dry indoor conditions (C1) Indoor with temporary condensation (C2)
- Description
- Flat T channel connector for fastening two MT channels together, for outdoor use with low pollution
- Material composition
- Q235 or better steel
- Surface finish
- Outdoor Coated - HDG
- Environmental conditions
- Outdoor, low to moderate pollution (C3 / C4 - low)
- Description
- Flat cross channel connector for fastening three MT channels together, for outdoor use with low pollution
- Material composition
- Q235 or better steel
- Surface finish
- Outdoor Coated - HDG
- Environmental conditions
- Outdoor, low to moderate pollution (C3 / C4 - low)
- Description
- Flat T channel connector for fastening two MT strut channels together, for outdoor use with low pollution
- Material composition
- Q235 or better steel
- Surface finish
- Outdoor Coated - HDG
- Environmental conditions
- Outdoor, low to moderate pollution (C3 / C4 - low)
- Description
- Flat channel connector used as a longitudinal extender for MT channels, for outdoor use with low pollution
- Material composition
- Q235 or better steel
- Surface finish
- Outdoor Coated - HDG
- Environmental conditions
- Outdoor, low to moderate pollution (C3 / C4 - low)
- Description
- Splice connector for coupling MT-60 strut channels end-to-end
- Material composition
- Q235 or better steel
- Surface finish
- Indoor Coated - Electro galvanised
- Environmental conditions
- Dry indoor conditions (C1) Indoor with temporary condensation (C2)
- Description
- Splice connector for coupling MT-60 strut channels end-to-end, for outdoor use with low pollution
- Material composition
- Q235 or better steel
- Surface finish
- Outdoor Coated - HDG
- Environmental conditions
- Outdoor, low to moderate pollution (C3 / C4 - low)
- Description
- Small load distribution plate for installing ventilation ducts, pipework or cable trays on flat roofs
- Material composition
- Aluminium, EPDM rubber
- Surface finish
- n/a
- Material thickness
- 2.75 mm
- Description
- Medium load distribution plate for installing ventilation ducts and ventilation equipment on flat roofs
- Material composition
- Aluminium, EPDM rubber
- Surface finish
- n/a
- Material thickness
- 2.75 mm
- Description
- Angle connector for assembling strut channels structure or channel with load distribution plate, for outdoor use with low pollution
- Material composition
- Q235 or better steel
- Surface finish
- Outdoor Coated - HDG
- Material thickness
- 4 mm
- Description
- 3D connector for assembling rigid strut channel structures for outdoor use with low pollution
- Material composition
- Q235 or better steel
- Surface finish
- Outdoor Coated - HDG
- Material thickness
- 4 mm
- Description
- Strut channel connector for assembling and bracing modular support structures with longer spans
- Material composition
- Q235 or better steel
- Surface finish
- Indoor Coated - Electro galvanised
- Environmental conditions
- Dry indoor conditions (C1) Indoor with temporary condensation (C2)
- Description
- Angle brace for modular support structures with longer spans
- Material composition
- Q235 or better steel
- Surface finish
- Indoor Coated - Electro galvanised
- Environmental conditions
- Dry indoor conditions (C1) Indoor with temporary condensation (C2)
- Description
- Strut channel connector for bracing modular support structures with longer spans
- Material composition
- Q235 or better steel
- Surface finish
- Indoor Coated - Electro galvanised
- Environmental conditions
- Dry indoor conditions (C1) Indoor with temporary condensation (C2)
- Description
- Strut channel connector with corrosion-resistant coating for assembling and bracing modular support structures with longer spans, for outdoor use with low pollution
- Material composition
- Q235 or better steel
- Surface finish
- Outdoor Coated - HDG
- Environmental conditions
- Outdoor, low to moderate pollution (C3 / C4 - low)
- Description
- Angle brace with corrosion-resistant coating for modular support structures with longer spans, for outdoor use with low pollution
- Material composition
- Q235 or better steel
- Surface finish
- Outdoor Coated - HDG
- Environmental conditions
- Outdoor, low to moderate pollution (C3 / C4 - low)
- Description
- Strut channel connector with corrosion-resistant coating for bracing modular support structures with longer spans, for outdoor use with low pollution
- Surface finish
- Outdoor Coated - HDG
- Environmental conditions
- Outdoor, low to moderate pollution (C3 / C4 - low)
- Description
- Galvanised threaded rod hinge for seismic bracing of MEP support structures
- Material composition
- Base plate: S355MC - DIN EN 10149-2, Pin: 11SMn30+C - DIN EN 10277-3, Threaded washer: 11SMn30+C - DIN EN 10277-3, Hexagon screws: Steel grade 8.8, Washer: Galvanised steel
- Surface finish
- Indoor Coated - Electro galvanised
- Material thickness
- 6 mm
- Description
- Galvanised hinge for seismic bracing of MEP support structures
- Material composition
- Connector: S275JR - EN 10025-2, Pin: 11SMnPb37+C - DIN EN 10277-3
- Surface finish
- Indoor Coated - Electro galvanised
- Material thickness
- 3 mm
- Description
- Base connector for anchoring strut channel structures under 3D loading to concrete or steel
- Material composition
- Q235 or better steel
- Surface finish
- Indoor Coated - Pre-galvanised
- Environmental conditions
- Dry indoor conditions (C1) Indoor with temporary condensation (C2)
- Description
- Hot-dip galvanised connector plate for cantilever connections with MT-80 MT-100 girders in moderately corrosive environments
- Material composition
- Q355 or better steel
- Surface finish
- Outdoor Coated - HDG
- Material thickness
- 4 mm
- Description
- Hot-dip galvanised girder connector for assembling and bracing modular support structures in moderately corrosive environments
- Material composition
- Q355 or better steel
- Surface finish
- Outdoor Coated - HDG
- Material thickness
- 4 mm
- Description
- Hot-dip galvanised girder connector for assembling and bracing modular support structures in moderately corrosive environments
- Surface finish
- Outdoor Coated - HDG
- Material thickness
- 4 mm
- Environmental conditions
- Outdoor, low to moderate pollution (C3 / C4 - low)
New
- Description
- Grade 8.8 bolt with square washer used for assembling raised floor systems in dry, indoor environments
- Material composition
- Q355 or better steel
- Surface finish
- Indoor Coated - Electro galvanised
- Environmental conditions
- Dry indoor conditions (C1) Indoor with temporary condensation (C2)
New
- Description
- Grade 8.8 bolt with hot-dip galvanised square washer used for assembling raised floor systems in moderately corrosive environments
- Surface finish
- Outdoor Coated - HDG
- Environmental conditions
- Outdoor, low to moderate pollution (C3 / C4 - low)
- Description
- Hanger for suspending MT-70 and MT-80 girders from threaded rod to create heavy-duty MEP and HVAC trapeze
- Material composition
- Q355 or better steel
- Surface finish
- Outdoor Coated - HDG
- Material thickness
- 4 mm
- Description
- Hanger for suspending MT-90 and MT-100 girders from threaded rod to create heavy-duty MEP and HVAC trapeze
- Material composition
- Q355 or better steel
- Surface finish
- Outdoor Coated - HDG
- Material thickness
- 4 mm
- Description
- Hot-dip galvanised girder connector for assembling and bracing modular support structures in moderately corrosive environments
- Material composition
- Q355 or better steel
- Surface finish
- Outdoor Coated - HDG
- Material thickness
- 4 mm
- Description
- Base connector for anchoring strut channel structures under 3D loading to concrete and steel, for outdoor use with low pollution
- Material composition
- Q235 or better steel
- Surface finish
- Outdoor Coated - HDG
- Environmental conditions
- Outdoor, low to moderate pollution (C3 / C4 - low)
- Description
- Base connector for anchoring strut channel structures under 3D loading to concrete and steel or steel
- Material composition
- Q235 or better steel
- Surface finish
- Indoor Coated - Pre-galvanised
- Environmental conditions
- Dry indoor conditions (C1) Indoor with temporary condensation (C2)
- Description
- Base connector for anchoring strut channel structures under 3D loading to concrete and steel, for outdoor use with low pollution
- Material composition
- Q235 or better steel
- Surface finish
- Outdoor Coated - HDG
- Environmental conditions
- Outdoor, low to moderate pollution (C3 / C4 - low)
- Description
- Base connector for anchoring MT-70 and MT-80 girder structures to concrete and steel, for outdoor use with low pollution
- Material composition
- Q355 or better steel
- Surface finish
- Outdoor Coated - HDG
- Environmental conditions
- Outdoor, low to moderate pollution (C3 / C4 - low)
- Description
- Base connector for anchoring 3D, heavy-duty MT-90 girder structures to concrete, for outdoor use with low pollution
- Material composition
- Q355 or better steel
- Surface finish
- Outdoor Coated - HDG
- Environmental conditions
- Outdoor, low to moderate pollution (C3 / C4 - low)
- Description
- Base connector for anchoring 3D, heavy-duty MT-100 girder structures to concrete, for outdoor use with low pollution
- Material composition
- Q355 or better steel
- Surface finish
- Outdoor Coated - HDG
- Environmental conditions
- Outdoor, low to moderate pollution (C3 / C4 - low)
- Description
- Adjustable sliding bracket for fastening MP-PS pipe shoes to Hilti MT modular girders
- Material composition
- S280GD+ZM300
- Surface finish
- Outdoor Coated - ZM
- Material thickness
- 5 mm
- Description
- Base connector for fixation of MT-90 and MT-100 girder structures to steel, for outdoor use with low pollution
- Material composition
- Q355 or better steel
- Surface finish
- Outdoor Coated - HDG
- Environmental conditions
- Outdoor, low to moderate pollution (C3 / C4 - low)
- Description
- Base connector for fixation of MT-90 and MT-100 girder structures to steel, for outdoor use with low pollution
- Material composition
- Q355 or better steel
- Surface finish
- Outdoor Coated - HDG
- Environmental conditions
- Outdoor, low to moderate pollution (C3 / C4 - low)
- Description
- Two-hole hinged connector for assembling seismic bracing of MT strut channel framing
- Material composition
- Q355 or better steel
- Surface finish
- Indoor Coated - Pre-galvanised
- Environmental conditions
- Dry indoor conditions (C1) Indoor with temporary condensation (C2)
- Description
- Two-hole hinged connector for assembling seismic bracing of MT strut channel framing, for outdoor use with low pollution
- Material composition
- Q355 or better steel
- Surface finish
- Outdoor Coated - HDG
- Environmental conditions
- Outdoor, low to moderate pollution (C3 / C4 - low)
- Description
- Hot-dip galvanised base connector for fastening MT-70 and MT-80 girders to structural steel in moderately corrosive environments
- Material composition
- Q355 or better steel
- Surface finish
- Outdoor Coated - HDG
- Material thickness
- 6 mm
- Description
- Hot-dip galvanised adjustable heavy-duty bracing and baseplate suitable for girders, concrete and steel
- Material composition
- Q355 or better steel
- Surface finish
- Outdoor Coated - HDG
- Material thickness
- 10 mm
- Description
- Threaded pipe clamp connector for fixing pipe clamps directly to MT girders
- Material composition
- Q355 or better steel
- Surface finish
- Outdoor Coated - HDG
- Environmental conditions
- Outdoor, low to moderate pollution (C3)
- Description
- Base connector for anchoring 3D, heavy-duty MT-90 girder structures to concrete in outdoor environments with low to moderate pollution (C3)
- Material composition
- Q355 or better steel
- Surface finish
- Outdoor Coated - HDG
- Material thickness
- 3 mm
- Description
- Galvanised pre-assembled threaded rod brace connector with increased load capacity for mounting to base material
- Material composition
- Connector: S275JR - DIN EN 10025, Pin: 11SMnPb37+C
- Surface finish
- Indoor Coated - Electro galvanised
- Material thickness
- 4 mm
- Description
- heavy-duty angled baseplate for bracing, long span supports or inclined surfaces, for outdoor use with low pollution
- Material composition
- Q355 or better steel
- Surface finish
- Outdoor Coated - HDG
- Material thickness
- 10 mm
- Description
- Base connector for anchoring MT-60D double strut channel to concrete
- Material composition
- Q355B
- Surface finish
- Indoor Coated - Electro galvanised
- Material thickness
- Baseplate 8 mm, Angle: 4mm
- Description
- Galvanised wing nut for connecting modular support system components
- Material composition
- Wings: plastic PA, Nut: S355MC - DIN EN 10149-2
- Surface finish
- Indoor Coated - Electro galvanised
- Environmental conditions
- Dry indoor conditions (C1) Indoor with temporary condensation (C2)
- Description
- Ultimate galvanised pipe clamp saddle – fire-tested according to ETA
- Approvals
- ETA
- Product class
- Premium
- Material composition
- Nut: C4C - DIN EN 10263, Plate: S 235 JRG2 - DIN EN 10025, Plastic: PBT
- Description
- Galvanised pivoting element for bracing modular support systems with threaded rod
- Material composition
- S235JR - DIN EN 10025
- Surface finish
- Indoor Coated - Electro galvanised
- Material thickness
- 5 mm
- Description
- Galvanised preassembled channel connector with FM approval for longitudinal seismic bracing of fire sprinkler pipes
- Material composition
- Connector: S275JR - DIN EN 10025, Channel plate: S275JR - DIN EN 10025, Base plate: S355MC - DIN EN 10149-2, Bolt: Steel grade 8.8, Nut: Steel grade 8
- Surface finish
- Indoor Coated - Electro galvanised
- Environmental conditions
- Dry indoor conditions (C1) Indoor with temporary condensation (C2)
- Description
- Galvanised pre-assembled strut channel connector with FM approval for transversal seismic bracing of fire sprinkler pipes
- Material composition
- Connector: S275JR - DIN EN 10025, Channel plate: S275JR - DIN EN 10025, Base plate: S355MC - DIN EN 10149-2, Bolt: Steel grade 8.8, Nut: Steel grade 8
- Surface finish
- Indoor Coated - Electro galvanised
- Environmental conditions
- Dry indoor conditions (C1) Indoor with temporary condensation (C2)
- Description
- Galvanised pre-assembled threaded rod stiffener for attaching strut channel to a threaded rod to accommodate compression loads
- Material composition
- Carbon steel
- Surface finish
- Indoor Coated - Electro galvanised
- Base material type
- Modular Support
- Description
- Galvanised wing nut for connecting modular support system components to MM strut channels
- Product class
- Premium
- Material composition
- Nut: DC04 - DIN EN 10130, Wing: PA
- Surface finish
- Indoor Coated - Electro galvanised
- Description
- Galvanised preassembled pipe clamp saddle for quick connection to MM strut channels
- Product class
- Ultimate
- Material composition
- Plate: DD11 - DIN EN 10111, Nut: DC04 - DIN EN 10130
- Surface finish
- Indoor Coated - Electro galvanised
- Description
- Galvanised pre-assembled threaded rod brace connector with increased installation flexibility for a wide range of seismic applications
- Material composition
- DD11 - DIN EN 10111, S235JR - DIN EN 10025, Base plate: S355MC - DIN EN 10149-2, Bolt: Steel grade 8.8, Nut: Steel grade 8
- Surface finish
- Indoor Coated - Electro galvanised
- Environmental conditions
- Dry indoor conditions (C1) Indoor with temporary condensation (C2)
- Description
- Galvanised pre-assembled strut channel connector for use in braced MQ channel trapezes for seismic applications
- Material composition
- S275JR - EN 10025, Bolt: Steel grade 8.8, Nut: Steel grade 8
- Surface finish
- Indoor Coated - Electro galvanised
- Material thickness
- 4 mm
- Description
- Angle support for MM system brackets
- Material thickness
- 2.5 mm
- Material composition
- S235JR - DIN EN 10025
- Surface finish
- Galvanized