Threaded studs

Show me threaded studs for a wide variety of applications on concrete and steel – such as grating, grounding, light cable trays or multi-purpose fastenings

Overview
More details

An error occurred

Unfortunately, products matching your chosen category can not be loaded, due to technical issues. Please try again later. Thank you for your understanding.

No products matching your requirements

Unfortunately, there are no products matching your requirements. Please udpate or reset your applied filters.

X-M6 D12

Threaded stud (for 12mm washer)

Base materials: Concrete (soft)
Corrosion protection: Zinc-coated 5-13 µm
Environmental conditions: Indoor, dry conditions

From AED 270.96

Compare (1)

X-M8 P8

Carbon steel threaded stud for use with powder-actuated nailers on concrete (8 mm washer)

Corrosion protection: Galvanised zinc coated <20 µm
Environmental conditions: Dry indoor
Material: Carbon steel

From AED 612.99

Compare (1)

X-EM6H FP8

M6 threaded stud (with 8 mm plastic washer)

Base materials: Steel
Minimum thickness of base material (steel): 4 mm
Corrosion protection: Galvanised zinc coated <20 µm

AED 517.30

Compare (1)

X-EM8H P8

M8 threaded stud (with 8 mm plastic washer)

Base materials: Steel
Minimum thickness of base material (steel): 6 mm
Corrosion protection: Galvanised zinc coated <20 µm

AED 810.05

Compare (1)

X-EM8H FP10

M8 threaded stud (with 10 mm plastic washer)

Base materials: Steel
Minimum thickness of base material (steel): 6 mm
Corrosion protection: Galvanised zinc coated <20 µm

AED 833.74

Compare (1)

X-EM8H P12

Carbon steel threaded stud for use with powder-actuated nailers on steel (12 mm washer)

Base materials: Steel
Minimum thickness of base material (steel): 6 mm
Corrosion protection: Galvanised zinc coated <20 µm

AED 810.05

Compare (1)

X-EM10H P10

M10 threaded stud (with 10 mm plastic washer)

Base materials: Steel
Minimum thickness of base material (steel): 6 mm
Corrosion protection: Galvanised zinc coated <20 µm

AED 1,147.34

Compare (1)

X-CR M8 P8

Stainless steel threaded stud for use with powder actuated nailers on concrete (8 mm washer)

Base materials: Concrete (soft), Concrete (tough)
Corrosion protection: Stainless steel A4(316) or equivalent
Environmental conditions: Dry indoor, Indoor with temporary condensation, Outdoor temporary applications, Outdoor with low pollution, Outdoor with moderate concentration of pollution, Coastal areas, Outdoor, areas with heavy industrial pollution

AED 3,580.00

Compare (1)

X-CR M8 P8

Threaded stud for multi-purpose fastenings on steel (8 mm washer)

Approvals: ABS, ICC, LR
Base materials: Steel
Corrosion protection: Equivalent to A4 (316) stainless steel

AED 2,091.58

Compare (1)

X-CR M8 P10

Threaded stud for multi-purpose fastenings on steel (10 mm washer)

Approvals: ABS, ICC, LR
Base materials: Steel
Corrosion protection: Equivalent to A4 (316) stainless steel

AED 2,760.84

Compare (1)

X-ST-GR M8

Threaded stud for grating and multi-purpose fastenings on steel in mildly corrosive environments

Base materials: Steel
Minimum thickness of base material (steel): 6 mm
Corrosion protection: Stainless steel A4(316) or equivalent

From AED 2,221.00

Compare (1)

Base materials: Concrete (soft)
Corrosion protection: Galvanised zinc coated <20 µm
Environmental conditions: Dry indoor

AED 1,167.24

Compare (1)

Corrosion protection: Galvanised zinc coated <20 µm
Environmental conditions: Dry indoor
Material: Carbon steel

From AED 4,058.76

Compare (1)

Corrosion protection: Galvanised zinc coated <20 µm
Environmental conditions: Dry indoor
Material: Carbon steel

From AED 5,158.71

Compare (1)

S-BT MF New

Threaded screw stud (carbon steel) for multi-purpose fastenings on steel

Base materials: Steel
Minimum thickness of base material (steel): 6 mm
Corrosion protection: Duplex coating, equivalent to 45 µm hot-dip galvanised

From AED 1,042.00

Compare (1)

S-BT MR New

Threaded stud (stainless steel) for multipurpose fastenings

Base materials: Steel
Minimum thickness of base material (steel): 6 mm
Corrosion protection: Stainless steel A4(316) or equivalent

From AED 2,553.00

Compare (1)

S-BT MR aluminum base material New

Threaded screw-in stud (stainless steel, metric thread) for multi-purpose fastenings on aluminium in highly corrosive environments

Base materials: Aluminium
Minimum thickness of base material (steel): 6 mm
Corrosion protection: Stainless steel A4(316) or equivalent

From AED 2,692.00

Compare (1)

S-BT GF New

Threaded screw stud (carbon steel) for grating and multi-purpose fastenings on steel

Base materials: Steel
Minimum thickness of base material (steel): 6 mm
Corrosion protection: Duplex coating, equivalent to 45 µm hot-dip galvanised

AED 962.00

Compare (1)

S-BT GR New

Threaded screw-in stud (stainless steel, metric thread) for grating fastenings on steel and aluminium in highly corrosive environments

Base materials: Steel
Minimum thickness of base material (steel): 6 mm
Corrosion protection: Stainless steel A4(316) or equivalent

AED 2,634.00

Compare (1)

S-BT-EF New

Threaded screw-in stud (HDG carbon steel, metric thread) for electrical connections on steel in mildly corrosive environments

Base materials: Steel
Minimum thickness of base material (steel): 6 mm
Corrosion protection: Duplex coating, equivalent to 45 µm hot-dip galvanised

From AED 1,070.28

Compare (1)

S-BT-ER New

Threaded screw-in stud (stainless steel, metric thread) for electrical connections on steel in highly corrosive environments

Base materials: Steel
Minimum thickness of base material (steel): 6 mm
Corrosion protection: Stainless steel A4(316) or equivalent

From AED 3,051.76

Compare (1)

X-BT M6

Threaded stud for multi-purpose fastenings on steel (for coated steel, metric)

Base materials: Steel
Minimum thickness of base material (steel): 8 mm
Corrosion protection: Stainless steel A4(316) or equivalent

AED 2,709.19

Compare (1)

X-BT M8

Threaded stud for grating and multi-purpose fastenings on steel

Base materials: Steel, Stainless steel, Cast iron
Minimum thickness of base material (steel): 8 mm
Corrosion protection: Stainless steel A4(316) or equivalent

AED 2,983.69

Compare (1)

X-BT M10

Threaded stud for multi-purpose fastenings on steel (for coated steel, metric)

Base materials: Steel
Minimum thickness of base material (steel): 8 mm
Corrosion protection: Stainless steel A4(316) or equivalent

AED 3,586.41

Compare (1)

X-BT-MF New

Threaded stud for multi-purpose fastenings on steel in mildly corrosive environments

Base materials: Steel
Minimum thickness of base material (steel): 8 mm
Corrosion protection: Galvanised zinc coated <20 µm

AED 1,100.00

Compare (1)

X-BT-ER

Threaded stud for electrical connectors on steel in highly corrosive environments

Base materials: Steel
Minimum thickness of base material (steel): 8 mm
Environmental conditions: Outdoor, areas with heavy industrial pollution, Coastal areas, Outdoor with moderate concentration of pollution, Outdoor with low pollution, Indoor with temporary condensation, Dry indoor, Outdoor temporary applications

From AED 2,795.16

Compare (1)

Back to products ()

Compare

Products ()

Added to cart

Go to shopping cart

Update of quantity

Please note, the order volume has been updated. This is due to package and minimum order quantities.

Please note, the order volume has been updated to . This is due to package and minimum order quantities.

Hilti = registered trademark of Hilti Corporation, 9494 Schaan, Liechtenstein
© 2009-2016, Right of technical and program changes reserved, S.E. & O.

Hilti UAE
Customer Service: 80044584