Skip to main content
Hilti
  1. Home
  2. Products
  3. Modular Support Systems
  4. Piping
  5. Heavy-duty channel system (MI)

Heavy-duty channel system (MI)

Hilti's strongest heavy-duty channel system for large-diameter pipes

All prices discounted net
Hilti's strongest heavy-duty channel system for large-diameter pipes
Filter Start Over
Product type
Base material type
27 Products
All prices discounted net
All prices discounted net

MI girder

Hot-dip galvanized (HDG) installation girders for constructing adjustable, heavy-duty MEP supports and modular 3D structures
  • Material composition: DD11 MOD – HN 555-4, S235JR – EN10025-2
  • Surface finish: Hot-dip galvanised, 75µm - DIN EN ISO 1461
From AED 4,636.23

MIC-C90-DH

Hot-dip galvanized (HDG) bracket for heavy-duty connections to concrete
  • Material composition: Hot-dip galvanised acc. to DIN EN ISO 1461
  • Surface finish: HDG: min 55 µm
From AED 1,233.66

MIC-C120-DH

Hot-dip galvanized (HDG) bracket for heavy-duty connections to concrete
  • Weight: 37.65 kg
  • Material composition: Hot-dip galvanised acc. to DIN EN ISO 1461
  • Surface finish: HDG: min 55 µm
AED 1,405.92

MIC-C-AA/-D

Hot-dip galvanised (HDG) baseplate for fastening MI-90 girders to concrete using two anchors
  • Material composition: Connector: DD11 MOD - HN 555-4, S235JR - DIN EN 10025-2; Bolt: Steel grade 8.8; Nut: Steel grade 8
  • Surface finish: HDG: connector 55 µm - DIN EN ISO 1461; bolt, nut 45 µm - DIN EN ISO 1461
  • Tightening torque: 84 Nm
From AED 1,124.91

MIC-C-DH

Connector (for concrete)
  • Material composition: Connector: DD11 MOD - HN 547, S235JR - DIN EN 10025; bolt: 8.8 grade steel; nut: 8 grade steel
  • Surface finish: HDG: Connector min 55 µm - DIN EN ISO 1461; Bolt, Nut 45 µm - DIN EN ISO 1461
  • Tightening torque: 84 Nm
From AED 1,405.92

MIC-CU-MAH

Hot-dip galvanized (HDG) connector for fastening girders directly to concrete at angles between 0 and 180 degrees
  • Weight: 2.26 kg
  • Material composition: Connector: DD11 MOD - HN 555-4, S235JR - DIN EN 10025-2; Bolt: Steel grade 8.8; Nut: Steel grade 8
  • Surface finish: HDG: Connector min 55 µm - DIN EN ISO 1461; Bolt, Nut 45 µm - DIN EN ISO 1461
AED 1,489.44

MIC-S

Connector (steel)
  • Weight: 7.14 kg
  • Material composition: Connector: DD11 MOD - HN 555-4, S235JR - DIN EN 10025-2; Bolt: Steel grade 8.8; Nut: Steel grade 8
  • Surface finish: HDG: connector 55 µm - DIN EN ISO 1461; bolt, nut 45 µm - DIN EN ISO 1461
AED 1,560.78

MI-DGC

Hot-dip galvanised (HDG) double beam clamp for connecting MI girders to steel beams for heavy-duty applications
  • Weight: 1.02 kg
  • Material composition: Clamp: EN-GJMB-350-10 - DIN EN 1562, EN-GJMB-450-6 - DIN EN 1562; U-bolt: Steel grade 8.8; Nut: Steel grade 8
  • Surface finish: HDG: Clamp 55 µm - DIN EN ISO 1461; U-bolt 48 µm - DIN EN ISO 10684; Nut 45 µm - DIN EN ISO 1461
AED 1,333.71

MIC-E

Hot-dip galvanised (HDG) connector used to connect MI girders longitudinally for long spans in heavy-duty applications
  • Material composition: Connector: DD11 MOD - HN 555-4, S235JR - DIN EN 10025-2; Bolt: Steel grade 8.8; Nut: Steel grade 8
  • Surface finish: HDG: connector 55 µm - DIN EN ISO 1461; bolt, nut 45 µm - DIN EN ISO 1461
  • Tightening torque: 84 Nm
From AED 1,308.00

MIC-UH

Standard hot-dip galvanized (HDG) connector for fastening MI girders to one another
  • Material composition: Connector: DD11 MOD - HN 555-4, S235JR - DIN EN 10025-2; Backing plate: EN-GJMW-400-5 - DIN EN 1562, EN-GJMB-450-7 - DIN EN 1562; Bolt: Steel grade 8.8; Nut: Steel grade 8
  • Surface finish: HDG: Connector 55 µm - DIN EN ISO 1461; Backing plate, Bolt, Nut 45 µm - DIN EN ISO 1461
  • Tightening torque: 84 Nm
From AED 1,404.18

MIC-T

Hot-dip galvanised (HDG) connector for fastening MI girders perpendicularly to one another
  • Weight: 2.2 kg
  • Material composition: Connector: DD11 MOD - HN 555-4, S235JR - DIN EN 10025-2; Tooth plate: S235 - EN 10025-2; Bolt: Steel grade 8.8; Nut: Steel grade 8
  • Surface finish: HDG: connector 55 µm - DIN EN ISO 1461; toothed plate, bolt, nut 45 µm - DIN EN ISO 1461
AED 1,547.73

MIC-L

Hot-dip galvanised (HDG) connector for fastening MI girders perpendicularly to one another
  • Weight: 4.05 kg
  • Material composition: Connector: DD11 MOD - HN 555-4, S235JR - DIN EN 10025-2; Backing plate: EN-GJMW-400-5 - DIN EN 1562, EN-GJMB-450-7 - DIN EN 1562; Tooth plate: S235 - EN10025-2; Bolt: Steel grade 8.8; Nut: Steel grade 8
  • Surface finish: HDG: connector 55 µm - DIN EN ISO 1461; backing plate, toothed plate, bolt, nut 45 µm - DIN EN ISO 1461
AED 1,588.62

MIC-U-MA

Hot-dip galvanised (HDG) multi-angle connector used with MIC-MAH connectors for fastening MI girders to one another at an angle
  • Weight: 2.63 kg
  • Material composition: Connector: DD11 MOD - HN 555-4, S235JR - DIN EN 10025-2; Tooth plate: S235 - EN 10025-2; Bolt: Steel grade 8.8; Nut: Steel grade 8
  • Surface finish: HDG: connector 55 µm - DIN EN ISO 1461; toothed plate, bolt, nut 45 µm - DIN EN ISO 1461
AED 1,707.81

MIA-EC

Girder end cap for safer and neater covering of MI and MIQ girder ends
  • Material composition: Moplen EP 240H
  • Temperature resistance: -30 - 90 °C
From AED 165.30

MIC-MI/MQ M8

Hot-dip galvanised (HDG) connector for fastening MQ strut channels parallel to MI girders
  • Weight: 0.06 kg
  • Material composition: Connector: DD11 MOD - HN 555-4, S235JR - DIN EN 10025-2; Bolt: Steel grade 8.8
  • Surface finish: HDG: connector 55 µm - DIN EN ISO 1461; bolt 45 µm - DIN EN ISO 1461
AED 386.71

MIC-MI/MQ-X

Hot-dip galvanised (HDG) connector for fastening MQ strut channels perpendicular to MI girders
  • Weight: 0.36 kg
  • Material composition: Connector: DD11 MOD - HN 555-4, S235JR - DIN EN 10025-2; Bolt: Steel grade 8.8; Nut: Steel grade 8
  • Surface finish: HDG: connector 55 µm - DIN EN ISO 1461; bolt, nut 40 µm - DIN EN ISO 10684
AED 4,200.36

MIA-EH

Hot-dip galvanised (HDG) screw with an integrated toothed plate for easier fastening and one-handed adjustment of MI and MIQ connectors
  • Weight: 0.18 kg
  • Material composition: Bolt: Steel grade 8.8; Tooth plate: S235 - EN 10025-2
  • Surface finish: HDG: 45 µm - DIN EN ISO 1461
AED 431.08

MIA-EH-P

Hot-dip galvanized (HDG) plate for easier fastening and one-handed adjustment of MI and MIQ connectors
  • Weight: 0.29 kg
  • Material composition: Plate: EN-GJMW-400-5 - DIN EN 1562, EN-GJMB-450-7 - DIN EN 1562; Spring: EN 10270-3
  • Surface finish: HDG: 45 µm - DIN EN ISO 1461
AED 522.00

MIA-OH

Hot-dip galvanized (HDG) screw for easier fastening and one-handed adjustment of MI and MIQ connectors
  • Material composition: Steel grade 8.8
  • Surface finish: HDG: 45 µm - DIN EN ISO 10684
  • Tightening torque: 84 Nm
From AED 257.08

MIA-TP

Hot-dip galvanized (HDG) tooth plate used with the MIA-OH bolt for fastening of MI and MIQ connectors
  • Weight: 0.06 kg
  • Material composition: S235 - EN 10025-2
  • Surface finish: HDG: 45 µm - DIN EN ISO 1461
AED 348.43

M12-F-SL-WS 3/4"

Prevailing torque hex nut
  • Weight: 0.02 kg
  • Material composition: Steel grade 8
  • Surface finish: HDG: 45 µm - DIN EN ISO 1461
AED 447.18

MI-UB

Hot-dip galvanized (HDG) U-bolt for fastening uninsulated pipes to MI girders
  • Material composition: U-bolt: DD11 MOD - HN 555-4, S235JR - DIN EN 10025-2; Nut: Steel grade 8
  • Surface finish: HDG: 45 µm - DIN EN ISO 10684
From AED 623.79

M-UB

Galvanised U-bolt for fastening uninsulated pipes to MI girders
  • Thread connection - M: M12
  • Weight: 0.33 kg
  • Material composition: S235JR - DIN EN 10025
AED 777.78

MIC-UB

Hot-dip galvanized (HDG) connector for fastening U-bolts to MI girders
  • Material composition: Connector: DD11 MOD - HN 555-4, S235JR - DIN EN 10025-2; Washer: DIN EN ISO 7089; Bolt: Steel grade 8.8; Nut: Steel grade 8
  • Surface finish: HDG: connector, square washer 55 µm - DIN EN ISO 1461; bolt, nut 45 µm - DIN EN ISO 1461
  • Wrench size: 19 mm
From AED 497.64

MIA-BO

Hot-dip galvanised (HDG) U-bolt for fastening pipe shoes to MI girders
  • Material composition: U-bolt: Steel grade 8.8 - ISO 898-1; Nut: Steel grade 8
  • Surface finish: HDG: 48 µm - DIN EN ISO 10684
  • Tightening torque: 84 Nm
From AED 610.74

r2955

Hot-dip galvanized (HDG) grade 8 hexagon nut corresponding to DIN 934
  • Material composition: Steel grade 8
  • Surface finish: Hot-dip galvanized - DIN EN ISO 10684
  • Base material type: n/a
From AED 81.78

r2956

Hot-dip galvanized (HDG) spacer coupling for extending threaded rods
  • Material composition: Steel grade 4.6
  • Surface finish: Hot-dip galvanized
  • Base material type: n/a
From AED 130.50
Back to products ()
Compare
Products ()
Do you need help? Don't ask me again
Log in to proceed
REGISTER HERE
Contact us
Contact
Call us
Call us
You can reach us toll free at:
80044584
Customer Service hours of operation:
Let us call you back
Request call-back
Just leave your name and number and we will get back to you in a couple of minutes during business hours:
* Required fields
Live chat with us
Chat with us
Start chatting by entering your name, e-mail and message.
* Required fields
Send us a message
Send us a message
Please send us your request using this form.
* Required fields
You will receive a copy of your message in your E-mail inbox.
* Required fields
Looking for a Hilti Store? Find a Hilti Store
Added to cart
Added to cart
Go to shopping cart

Hilti = registered trademark of Hilti Corporation, 9494 Schaan, Liechtenstein
© 2009-2016, Right of technical and program changes reserved, S.E. & O.

Hilti UAE
Customer Service: 80044584

Hilti offers the tools, the knowledge and expertise See how we can support your projects