Power
Drilling
Steady power for your applications: rebar, anchor, through holes.
Rotary hammers
Rotary
Hammers
Peak performance for tough tasks
Control
Chiseling
Easier channeling and carving – from light precision work to tougher materials.
Precision
Coring
Create more accurate holes for pipe penetrations, electrical outlets, or utility lines.
Impact
Demolition
Designed to break right through tough concrete, stone, and masonry.
Power
Drilling
Steady power for your applications: rebar, anchor, through holes.
Control
Chiseling
Easier channeling and carving – from light precision work to tougher materials.
Precision
Coring
Create more accurate holes for pipe penetrations, electrical outlets, or utility lines.
Impact
Demolition
Designed to break right through tough concrete, stone, and masonry.
Designed for productivity and safety
High-performance Nuron battery platform
Helps keep you more productive when paired with the optimal charger and inserts
Active Torque Control (ATC)
Stops tool body from spinning uncontrollably if drill bit jams
Active Vibration Reduction (AVR)
Helps boost productivity throughout the day by making work more comfortable and reducing user fatigue
Dust Removal System
Supports more efficient and safer work by reducing fine dust while drilling by up to 97% (vacuum required)
Pick your power source
For applications that require mobility, and for job sites with limited power supply, choose Hilti cordless rotary hammers on our Nuron battery platform. For continuous serial applications where mobility is not critical, corded rotary hammers are your best choice. No matter whether cordless or corded: you will always experience the full power and performance of Hilti.
Cordless
What you can do with one charge*
Up to
22
22 mm diameter, 22 cm depth
When to use corded
High volume on spot applications
with stable power supply
* *Based on internal testing with:
TE 70-22 cordless rotary hammer TE-YX drill bit 1x B 22-290 Nuron battery Jobsite conditions, such as temperature, humidity, dust levels, and materials being worked on, can significantly affect the maximum amount of work possible with one battery charge.
Power up your tool park
FAQs
To maximize reach of your Hilti cordless rotary hammers, choose a system of batteries, chargers, and inserts optimized for top-class cordless performance.
Battery
For our larger rotary hammers like the TE-60, choose B 22-290 Nuron battery – Hilti’s highest-capacity 22V Li-ion battery. Compatible with all Nuron cordless tools.
Charger
The C 8-22 Nuron ultimate charger is our fastest way to recharge your Nuron batteries, restoring power in as little as 30 minutes.
Inserts
To help maximize the amount of work done, select Hilti’s Ultimate line inserts. Using Ultimate line drill bits, for example, provides up to 30% faster drilling speeds, helping you to extend your reach and get more holes.
Hilti offers a wide range of high-performance inserts designed to maximize efficiency and durability for your applications.
1. Remove battery or unplug
Always unplug corded tools or remove batteries from cordless models before cleaning to prevent accidental activation.
2. Remove stubborn dirt
Carefully remove stubborn dirt from the tool.
3. Clean air vents
Carefully clean the air vents, if present, with a dry, soft brush.
4. Clean housing
Use only a slightly damp cloth to clean the housing. Do not use cleaning agents containing silicone as these can attack the plastic parts. Use a dry, clean cloth to clean the contacts of the product.
This FAQ provides general cleaning guidance only and does not replace the operating instructions. For complete cleaning, care, maintenance and safety instructions, always refer to the operating instructions for your specific Hilti rotary hammer model.
1. Disconnect power
Always unplug corded tools or remove batteries from cordless models before storage.
2. Choose your suitable location
Store the product (and the batteries) in a cool and dry place where they cannot be accessed by children or unauthorized persons. Never leave batteries in direct sunlight, on sources of heat, or behind glass.
3. Inspect before and after storage
Prior to each use and before and after prolonged storage, check the product and the batteries for damage.
This FAQ provides general storage guidance only and does not replace the operating instructions. For complete instructions, always refer to the operating instructions for your specific Hilti rotary hammer model. For information on correct handling and storage of batteries, please refer to Batteries and chargers - Hilti United Arab Emirates
Materials and workmanship
For virtually all of our tools, we will repair or replace parts that break as a result of defects in materials or workmanship for 20 years (2). Any additional claims are excluded.
2 year wear and tear coverage
No cost coverage
We will repair most tools at no cost for 2 years from the date of purchase. This includes spare parts, labor and shipping. After the no cost coverage period, you'll pay for your repairs but costs are capped (3).
3 day repair turnaround
3 day repairs
You will usually receive your tool back within three days of ordering a repair. We’ll even pick up your broken tool at your jobsite and return it to the same place (4).
Notes
(1) Figure from 2024
(2) It is at Hilti’s sole discretion whether to repair or replace the tool or refund the tool purchase price, if spare parts are unavailable. Customer’s mandatory statutory warranty rights in case of product defects remain unaffected.
(3) No Cost Coverage: Some exceptions apply.
Please note that damage due to abuse, or use not in accordance with the tool operator’s manual are not covered and are charged.
(4) 3-Day Repair Period: While Hilti will aim to get your tools back to you within the stated 3 day period, turnaround times are not guaranteed and any claims in case of longer repair periods are excluded. Hilti is not liable for any damages or losses caused by later delivery of the repaired tool.
Get your rotary hammer