MP-PS 4-2 pipe shoe
Pipe shoe MP-PS L4-2 401-411 16" OC #2331038
Outdoor coated (OC) pipe shoe with height and slope adjustability for heavy industrial applications with outer pipe diameters of 217-610 mm (8" to 24")
- Clamping range - D: 401 - 411 mm
- Nominal pipe size (imperial): 16 in
- Nominal pipe size: 400 mm
Choose options
Clamping range - D
- 401 - 411 mm
Height above ground to base of pipe
- 88.5 - 116 mm
Nominal pipe size (imperial)
- 16 in
Nominal pipe size
- 400 mm
Pack size
- 1 pc
Quantity
Packs
Total Pieces
1
Ex Vat and Packaging/Forwarding charges
Technical Data
Clamping range - D
401 - 411 mm
Nominal pipe size (imperial)
16 in
Nominal pipe size
400 mm
Fire resistance (yes/no)
No
Temperature resistance
-20 - 300 °C
Material composition
Base-plate: S280GD / Modif POSMAC-C, Bows: S235JR - DIN EN 10025, Middle-plate: S235JR - DIN EN 10025, Sliding-plate: PA66 + GF30, Bolt: Steel grade 8.8, Nut: Steel grade 8
Material thickness
base-plate: 4mm, Middle-plate: 7mm, Sliding-plate: 3mm, Serrated washer: 4mm
Surface finish
Outdoor Coated - HDG
Hot-dip galvanized
Yes
Stainless steel
No
Environmental conditions
Outdoor, low to moderate pollution (C3 / C4 - low)
Base material type
Concrete, Steel, Modular Support
Clamping screw
M16x80
Tightening torque
60 Nm
Wrench size
19 mm
Tightening torque for height adjustment
50 Nm
Cross section width - b
60 mm
Cross section thickness - s
6 mm
Cross section width and thickness (b x s)
60 x 6 mm
Height - H
507 mm
Height above ground to base of pipe
88.5 - 116 mm
Height above ground to base of pipe min.
88.5 mm
Height above ground to base of pipe min. (conversion inch fractional)
3-1/2 in
Height above ground to base of pipe max.
116 mm
Height above ground to base of pipe max. (conversion inch fractional)
4-9/16 in
Height above ground to center of pipe
294 - 321.5 mm
Height above ground to center of pipe min.
294 mm
Height above ground to center of pipe min. (conversion inch fractional)
11-9/16 in
Height above ground to center of pipe max.
321.5 mm
Height above ground to center of pipe max. (conversion inch fractional)
12-11/16 in
Width - B
434 mm
Length
256 mm
Weight
14.68 kg
Documents
Features & Applications
Features
- One-for-all versatility – use the same pipe shoe system for fix-, slide-, guided- or freestanding supports to Hilti modular girders, steel beams and concrete
- Extensive software support – simplify calculation by using PROFIS, Hilti FixPoint Calculator, BIM/CAD libraries and various plug-ins
- Load data and documentation available – design according to EN13480-3, Eurocode 3 and MSS-SP58 guidelines for pipe support components
- Quicker installation on-site – easily adjust the height and slope after fastening the pipe shoe in place
- Wider clamping range – suitable for various different pipes with or without additional inlays
Applications
- Fastening pipes to steel beams, concrete or Hilti modular support girders
- Pipe installations in onshore industrial, power generation, pharmaceutical, electronics or automotive manufacturing facilities
- Suitable for application temperatures of up to 300 °C and an insulation thickness of up to 220 mm
- Recommended for use in Indoor or Outdoor with low to moderate pollution (C3)
Related Products
Adjustable guiding bracket for fastening MP-PS pipe shoes to Hilti MT modular girders
