Engineering Center

Posted by Ahmed Amrover 3 years ago

Is the HY170 Availavble in anchoring-masonry design on PE

Im trying to design with the HY170 in anchoring-masonry on PE but i cant find it

HY170,Masonry,PE

Posted by Colin Baileyover 3 years ago

RE 500 vs HY 200

can i use RE 500 w/ HAS B 105 thrd rod for anchorage? which has the higher characteristic bond stress

bond stress,post installed anchor

Posted by Tasneem Gendiaalmost 4 years ago

What is α5 in the anchorage length of splices equation ?

What is α5 in the anchorage length of splices equation for the embedment depth lb refer to, as I can see that in the definition it says it takes into account the confinement by transverse pressure. Can you please explain further what does transverse pressure mean? TIA

Parameter,post installed rebar

Posted by Tasneem Gendiaalmost 4 years ago

What is the allowable embedment depth in the reinforced concrete theory ?

https://ask.hilti.co.uk/article/the-differences-between-en1992-1-vs-tr069-in-post-installed-rebar-design/c7tpky As per the article the embedment ranges between 60d≥lb≥max(0.3lb;10d; 100mm), there is no reference in the EC2 for the 60d minimum embedment, can you please explain or give any reference for the 60d ?

rebar,EC2,embedment

Posted by Hadialmost 4 years ago

I need material properties of HY 170

I need material properties of fully cured Hy 170, similar property table for Re 10 and 100 is present but cannot find for HY 170.

anchoring,chemical anchoring

Posted by rohailalmost 4 years ago

I need to to slove this comment about anchoring bolts

anchoring bolts to sutable for load alog with FOS,bolts to STAINLESS STEEL& suitable for hollow block PLEASE HELP TO SLOW THIS AND CHOICE CORRECT ANCHORING BOLT FOR VANITY CABNINT THANKS

Available Anchor in Middle East,anchoring

Posted by Amjad Alnawasrahalmost 4 years ago

EN959:2018 Mountaineering equipment, Safety requirements and test methods

Do we have test or smiler to confirm if any HAS-R M10 anchors are compliant with the EN 959:2018 standard

Test reports EN959,Mountaineering equipment

Posted by Rony Jacobabout 4 years ago

How to check anchorage when anchors in different plane?

How to analyze and check concrete anchorage capacity when post installed anchors are connected to the concrete structure in two direction. Is there any minimum criteria in placing the anchors in such conditions? As per the detail attached vertical shear from the steel beam gets transferred as shear (slight tension will also be...

Anchors HST3,chemical anchoring

Posted by Faithabout 4 years ago

HUS6 IN PROFIS ENGINEERING

Customer would like to know why they cannot design using HUS6 anchor in Profis

Designing HUS6 in PE,HUS6

Posted by Shawnabout 4 years ago

Product Recommendation

To meets specs requiring 1" diameter 8 UNC anchor embedded to withstand 19,836 tension / pull out load, please recommend product and install

Anchors,ratings,installation length

Showing 51-60 of 161 Results