X-P MX New
Ultimate
Ultimate-performance collated nails for fastening to concrete and other base materials using powder-actuated tools
- Base materials: Concrete (soft), Concrete (tough), Steel, Masonry (solid limestone brick)
- Minimum thickness of base material (concrete): 80 mm
- Corrosion protection: Galvanised zinc coated <20 µm
From
AED 200.00
X-P P8 New
Ultimate
High-performance single nail for use with powder-actuated tools on concrete and other materials
- Base materials: Concrete (soft), Concrete (tough), Steel, Masonry (solid limestone brick)
- Minimum thickness of base material (concrete): 80 mm
- Minimum thickness of base material (steel): 6 mm
From
AED 200.00
X-U MX
Ultimate
Ultimate-performance collated nails for fastening to concrete and steel using powder-actuated tools
- Minimum thickness of base material (concrete): 80 mm
- Minimum thickness of base material (steel): 6 mm
- Corrosion protection: Galvanised zinc coated <20 µm
From
AED 167.04
X-U P8
Ultimate
High-performance single nail for concrete and steel, for powder-actuated tools
- Minimum thickness of base material (concrete): 80 mm
- Minimum thickness of base material (steel): 6 mm
- Corrosion protection: Galvanised zinc coated <20 µm
From
AED 167.04
X-U P8
Ultimate
Ultimate-performance single nail with steel washer for fastening to concrete and steel using powder-actuated tools
- Minimum thickness of base material (concrete): 80 mm
- Corrosion protection: Galvanised zinc coated <20 µm
- Environmental conditions: Dry indoor
From
AED 287.10
X-C MX
Premium
Premium collated nails for fastening to concrete using powder-actuated tools
- Base materials: Concrete (soft), Concrete, Masonry (solid limestone brick)
- Minimum thickness of base material (concrete): 80 mm
- Corrosion protection: Galvanised zinc coated <20 µm
AED 1,157.10
X-C MX
Premium
Premium collated nails for fastening to concrete using powder-actuated tools
- Base materials: Concrete (soft), Concrete, Masonry (solid limestone brick)
- Minimum thickness of base material (concrete): 80 mm
- Corrosion protection: Galvanised zinc coated <20 µm
From
AED 582.90
X-C P8
Premium
Premium single nail for fastening to concrete using powder-actuated tools
- Base materials: Concrete (soft), Masonry (solid limestone brick), Concrete
- Minimum thickness of base material (concrete): 80 mm
- Corrosion protection: Galvanised zinc coated <20 µm
From
AED 146.16
r8188600
Premium
- Base materials: Concrete (soft), Concrete, Masonry (solid limestone brick)
- Minimum thickness of base material (concrete): 80 mm
- Corrosion protection: Galvanised zinc coated <20 µm
AED 543.75
X-C P8S
Premium
Premium single nail with steel washer for fastening to concrete using powder-actuated tools
- Base materials: Concrete (soft), Concrete (tough)
- Minimum thickness of base material (concrete): 80 mm
- Corrosion protection: Galvanised zinc coated <20 µm
AED 1,844.40
X-C P8S New
Premium
Premium single nail with steel washer for fastening to concrete using powder-actuated tools
- Base materials: Concrete, Concrete (soft), Masonry (solid limestone brick)
- Minimum thickness of base material (concrete): 80 mm
- Corrosion protection: Galvanised zinc coated <20 µm
From
AED 1,026.60
X-CT DP8
Premium
Single formwork nail for use with powder actuated tools on concrete
- Base materials: Concrete (soft), Concrete, Masonry (solid limestone brick)
- Minimum thickness of base material (concrete): 80 mm
- Corrosion protection: Galvanised zinc coated <20 µm
AED 107.88
X-CR P8
Ultimate
Stainless steel single nail for steel and concrete, for powder-actuated tools
- Minimum thickness of base material (steel): 5 mm
- Corrosion protection: Stainless steel A4(316) or equivalent
- Environmental conditions: Dry indoor, Indoor with temporary condensation, Outdoor temporary applications, Outdoor with low pollution, Outdoor with moderate concentration of pollution
From
AED 650.76
X-CR S12
Ultimate
Single nail for use with powder actuated tools on steel in corrosive environments
- Base materials: Steel
- Minimum thickness of base material (steel): 6 mm
- Corrosion protection: Stainless steel A4(316) or equivalent
AED 748.20
X-CR P8 S
Ultimate
Single nail with steel washer for use with powder actuated nailers on steel and concrete in corrosive environments
- Base materials: Concrete (soft), Concrete (tough), Steel
- Minimum thickness of base material (steel): 6 mm
- Corrosion protection: Stainless steel A4(316) or equivalent
AED 1,830.48
X-EDS
Ultimate
Universal fastener
- Base materials: Steel
- Minimum thickness of base material (steel): 6 mm
- Environmental conditions: Dry indoor
AED 301.02
X-ENP MX
Ultimate
Collated nails for fastening metal decks to steel structures with powder-actuated nailers
- Base materials: Steel
- Minimum thickness of base material (steel): 6 mm
- Corrosion protection: Galvanised zinc coated <20 µm
AED 5,394.00
X-ENP
Ultimate
Single nail for fastening metal decks to steel structures with powder-actuated nailers
- Base materials: Steel
- Minimum thickness of base material (steel): 6 mm
- Corrosion protection: Galvanised zinc coated <20 µm
AED 492.42
X-ENP HVB
Ultimate
Single nails for fastening shear connectors to steel structures with powder-actuated nailers
- Base materials: Steel
- Minimum thickness of base material (steel): 6 mm
- Corrosion protection: Galvanised zinc coated <20 µm
AED 452.40
