Setting tools - Hilti United Arab Emirates

HSD-M Setting tool Setting tool for drop-in anchors

TE-Y-HDA-ST Setting tool Setting tool – required for installation of HDA undercut anchors

TE-Y-E Setting tool Setting tool for capsule anchor rods with Conical heads

TE-T-E Setting tool Setting tool for capsule anchor rods with Conical heads

TE-C-E Setting tool Setting tool for capsule anchor rods with conical heads

SI-S 1/2" L Deep impact socket 1/2" long impact socket for tightening bolts and anchors

TE-C-HDA-ST Setting tool Setting tool – required for installation of HDA undercut anchors

SI-S 1/2" S Short impact socket 1/2" (inch) short impact socket for tightening bolts and anchors

SI-S 1/2" DW Deep impact socket 1/2" (inch) long impact socket for tightening bolts and anchors, with magnetic impact and thin wall adaptation

S-TB Torque bar Torque-controlled socket wrench for setting HSA anchors

TE-C-HDA-GT Undercut tool Undercut tool – for creating the undercut for HDA anchors where rebars are hit

1/2" S-NSD Impact socket set Impact socket set for tightening bolts and anchors

HKD-TE-CX Setting tool (short) Setting tool for short HKD anchors with an integrated SDS Plus (TE-C) stop hammer drill bit

TE Tool shaft TE Tool Shaft for sockets

HIS-S Setting tool Setting tool for internally threaded sleeves

Setting tool HPE-M 10/30 Machine setting tool (HPD)

TE-C HEX, TE-Y HEX Setting tool Setting tool for capsule anchor rods with hexagon heads

TE Setting adapter (HVU2) Setting adapter for capsule anchor rods with hexagon heads

HSP Setting tool Setting tool (HSP/HFP)

Setting tool HSU ST-G M6 manual Setting tool – required for installation of HSU-R stone undercut anchors

Setting tool HSU ST-G M8 manual Setting tool – required for installation of HSU-R stone undercut anchors